Home

Call

Enquiry

Mail
+91-9910111641 +91-9871481152 +91-01204310416 info@ncpnetwork.com

200-125 CCNA Ver 3.0 (NEW Syllabus)
The Reasons That You Should Contact Us

No prerequisites exam

Duration: 80hrs
Exam Description:
The Cisco Certified Network Associate (CCNA) Routing and Switching composite exam (200-125) is a CCNA Routing and Switching certification. This exam tests a candidate's knowledge and skills related to network fundamentals, LAN switching technologies, IPv4 and IPv6 routing technologies, WAN technologies, infrastructure services, infrastructure security, and infrastructure management.

Details:
Weekadays Classes 2hr/day (Syllabus Complete aprox. 2 month)
Weekaend Classes 2hr/Sat-Sun (Syllabus Complete aprox. 2 & half month )

CCNA
Syllabus

Course

Configure, verify, and troubleshoot IPv4 Addressing

  • IP address
  • Version of IP Address
  • Characteristics of IPV4
  • Classification of IPV4
  • Public IP Address
  • Private IP Address
  • Network Mask
  • Role of Network mask in IP Addressing
  • Default Mask of Classful IP Address
  • IP Address is combination of Network bits & Host bits
  • Network ID or Network Address
  • Broadcast ID or Broadcast Address
  • ANDing Process
  • No. of Network ID’s & Valid IP Address in Class A, Class B, Class C
  • Design & Implementation of Network Scenario with Classful Network
  • IPV4 Saving Techniques
    • - Subnetting, VLSM, NAT, PAT

-

Subnetting & its advantages

  • How to proceed for Subnetting
  • Design & Implementation of Network Scenario with subnet.
  • VLSM & its advantages.
  • Summarization & how to calculate Summary address
  • Supernetting & how to calculate Supernet Address
  • Difference between Supernetting, Summarization, Subnet ID, Sub-Subnet ID

-

Tips & Tricks

  • Network Address, Broadcast Address
  • First Valid IP address
  • Last valid IP address
  • Valid range of IP address
  • Subnet mask
  • Block size
  • Next Network Address

-

Compare and Contrast IPv4 address types

  • - Unicast
  • - Broadcast
  • - Multicast
  • Describe the need for private IPv4 addressing
  • Configure and verify initial device configuration
  • General port diagram of Cisco Routers
  • Cable & Connection
  • Connectivity diagram of Cisco Routers with Network Devices

-

Describe the boot process of Cisco IOS routers

  • - POST
  • - Booting Process of Routers
  • Boot preferences
  • - Cisco IOS image(s)

-

How to access Cisco Router Console

  • Basic Management mode & Commands of Cisco Router
  • Configure, verify, and troubleshoot basic device hardening
  • Local authentication
  • Secure password
  • Access to device
  • - Source address
  • - Telnet/SSH
  • - Login banner

-

LAB:

  • 1. Configure and verify utilizing the CLI to set basic Router configuration
  • 2. Cisco IOS commands to perform basic router setup
  • 3. Configure and verify operation status of a device interface, both serial and ethernet
  • 4. Verify router configuration and network connectivity

-

Troubleshooting:

  • Basic & Advance commands
  • Configure, verify, and troubleshoot

-

IPv4 Static Routing

  • Basic Routing Concept
  • Routed & Routing Protocols
  • Types of Routing & Protocols.
  • Static Routing
  • - Static Route
  • - Default route
  • - Host route
  • - Float route

-

LAB: IPv4 Static Routing

  • 1. Configure and verify Static Route
  • 2. Configure and verify Default Route
  • 3. Configure and verify Float Route
  • 4. Configure and verify Host Route

-

Troubleshooting: IPv4 Static Routing

  • Troubleshoot and Resolve routing issues
  • - Routing is enabled
  • - Routing table is correct
  • - Correct path selection
  • - Verify Interface status and protocol
  • - Verify NID
  • - Verify Mask
  • - Verify AD
  • - Verify Next Hop

-

Brief Discussion on below mentioned Command in LAB

  • # show ip interface brief
  • # show protocols
  • # show running-config
  • # show startup-config
  • # show ip route
  • # show ip route connected
  • # show ip route static
  • # Traceroute
  • # Ping

-

Static Vs Dynamic Protocol

  • Compare and contrast static routing and dynamic routing.
  • Compare and contrast distance vector and link state routing protocols.
  • Compare and contrast interior and exterior routing protocols.

-

OSPF (Open Shortest Path First)

  • Configure, verify, and troubleshoot single area and multi-area OSPFv2 for IPv4
  • OSPF Terminology
  • Link-states Advertisement
  • Router ID & its selection.
  • Loopback Interface & Loopback Address
  • Hello Timer & Dead Timer
  • Concept of Area in OSPF & its Advantages
  • Backbone area
  • Types of Area’s in OSPF
  • OSPF router interface Priority
  • DR & BDR Concept
  • Process ID
  • Concept of Wild Card Mask
  • ABR & ASBR
  • Passive Interface
  • AD & Metric
  • Neighbor adjacency components
  • OSPF router states
  • OSPF LSA Types
  • Discuss OSPF single & multi area

-

Type of Tables in OSPF

  • Neighbor Table
  • Topology Table
  • Routing Table

-

Types of OSPF Network Topologies

  • Point-to-Point
  • BMA
  • NBMA

-

LAB: OSPF

  • 1. Configure and verify ospfv2 single area
  • 2. Configure and verify ospfv2 multi area
  • 3. Configure and verify Redistribution with non-ospf
  • 4. Stop unwanted Traffic on LAN segment (using passive-interface.)
  • 5. Verify ospf metric calculation.
  • 6. Modify OSPF Parameter.

-

Troubleshooting: OSPF

  • Troubleshoot and Resolve routing issues
  • - Verify Interface status and protocols
  • - Verify NID Under OSPF Process
  • - Routing is enabled
  • - Routing table is correct
  • - Correct path selection

-

Troubleshoot and Resolve OSPF Problems

  • Neighbor adjancies
  • Hello & dead timer.
  • OSPF area
  • Network type
  • Passive interface
  • Wild card mask incorrect
  • Neighbor states

-

Brief Discussion on below mentioned Command in LAB

  • # show ip interface brief
  • # show protocols
  • # show running-config
  • # show ip route
  • # show ip route connected
  • # show ip route ospf
  • #show ip ospf neighbor
  • #show interface
  • #show ip ospf interface
  • #show ip ospf database
  • #debug ip packet
  • #debug ip icmp
  • # traceroute
  • # ping

-

EIGRP

  • Configure, verify, and troubleshoot EIGRP for IPv4
  • Characteristics of EIGRP
  • Dual & its components
  • Successors /Feasible Successors /reported distance/Feasible Distance
  • Feasibility condition
  • Metric composition
  • Auto summary & no auto summary
  • Multicast address of Eigrp
  • Hello & Hold timer
  • Variance factor
  • Path selection
  • AD’’s of Eigrp
  • Passive interface
  • Wild card mask
  • Load balancing

    • - Equal & Unequal

-

Neighbor adjacency Parameter

  • Hello
  • ASN
  • METRIC WEIGHT

-

LAB:

  • Configure and verify EIGRP
  • Configure and verify Redistribution with non-eigrp
  • Configure and verify load share via “variance factor
  • Stop unwanted Traffic on LAN segment (using passive-interface.)
  • Modify EIGRP Parameter.

-

Troubleshooting:

  • Troubleshoot and Resolve routing issues
  • - Verify Interface status and protocols
  • - Verify NID Under EIGRP Process
  • - Routing is enabled
  • - Routing table is correct
  • - Correct path selection

-

Troubleshoot and Resolve EIGRP problems

  • Neighbor adjancies
  • AS number
  • Load balancing
  • Split horizon
  • Passive interface
  • Variance factor
  • Wild card mask incorrect

-

EIGRP: Brief Discussion on below mentioned Command in LAB

  • # show ip interface brief
  • # show protocols
  • # show running-config
  • # show ip route
  • # show ip route connected
  • # show ip route eigrp
  • # show ip eigrp neighbour
  • # show ip eigrp topology
  • # debug ip packet
  • # debug ip icmp
  • # traceroute
  • # ping

-

RIP (Routing Information Protocol)

  • Configure, verify, and troubleshoot RIPv1 and RIPv2
  • Formation of routing table in DVRP
  • Types of timers to create and maintain Routing table
  • How loop was formed rapidly when Loop eliminated techniques were not developed
  • How to provide fast conversion in DVRP
  • How to prevent bad metrics in DVRP.
  • Characteristics of Rip
  • Difference between RIPv1 and RIPv2

-

Loop Eliminate Technique and how it works

  • - Hop count
  • - Split Horizon
  • - Route Poison
  • - Poison reverse

-

LAB: RIP

  • Configure and verify RIPv1 and RIPv2
  • Configure and verify Redistribution with non-rip
  • Stop unwanted Traffic on LAN segment (using passive-interface.)

-

BGP (Border Gateway Protocol)

  • Configure and verify single-homed branch connectivity using eBGP IPv4 (limited to peering and route advertisement using Network command only)
  • Introduction to BGP
  • - When to use BGP
  • - When not to use BGP
  • - Types of BGP Peering
  • - Three main reason why BGP Peering fails
  • - BGP Tables
  • - BGP Network Advertisement

-

LAB: BGP

  • Configure & Verify IBGP Peering.
  • Configure & Verify EBGP Peering.
  • Configure & Verify BGP Network Advertisement

-

Routing Technologies

  • Describe the routing concepts
  • Packet handling along the path through a network
  • Forwarding decision based on route lookup
  • Prefix
  • Network mask
  • Next hop
  • Routing protocol code
  • Administrative distance
  • Metric
  • Gateway of last resort
  • Describe how a routing table is populated by different routing information sources
  • Admin distance
  • Troubleshoot basic Layer 3 end-to-end connectivity issues

-

Configure and verify device management

  • Configure and verify device-monitoring protocols

    • - Syslog
  • Configure and verify device management

    • - Backup and restore device configuration
    - Using Cisco Discovery Protocol
    - Logging
    - Loopback
    - Resolving hostname
  • Configure and verify NTP operating in a client/server mode.

-

Perform device maintenance

  • Cisco IOS upgrades and recovery (TFTP)
  • Password recovery and configuration register
  • Ping and traceroute with extended option
  • Terminal monitor
  • Telnet
  • Checking telnet connection, users
  • Suspended key

-

Infrastructure Services

  • Configure and verify DHCP on a router (excluding static reservations)

    • - DHCP Server
    - Relay
    - Client DNS, and gateway
  • Troubleshoot client- and router-based DHCP connectivity issues

-

LAB:

  • 1. Verify CDP to find out information of directly connected Cisco devices
  • 2. Disable CDP on router and interface
  • 3. Modify CDP Timers.
  • 4. Configure and verify of Advance Telnet feature.
  • 5. Configure & Verify HOST Resolving.
  • 6. Backup of IOS File
  • 7. Backup of Configuration File.
  • 8. Restoring of IOS File
  • 9. Restoring of Configuration File.
  • 10. Cisco router Password recovery & Recovery of NVRM File.
  • 11. Configure and verify DHCP Features.

-

IPv4 Packet Filtering via RACL

  • Configure, verify, and troubleshoot IPv4 access list for traffic filtering (Standard, Extended Named )
  • Describe the types, features, and applications of ACLs

    • - Editing
    - Extended
    - Named
    - Numbered
    - Inbound & Outbound ACL
  • Drawback of Standard & Extended ACL
  • How to overcome Drawback of Standard &Extended ACL
  • ACL Implementation Rules

-

LAB: IPv4 Packet Filtering via RACL

  • 1. Configure and verify Numbered Standard
  • 2. Configure and verify Named Standard ACL
  • 3. Configure and verify Numbered Extended
  • 4. Configure and verify Named Extended ACL

-

WAN Technologies

  • Configure and verify PPP and MLPPP on WAN interfaces using local authentication
  • Configure, verify and troubleshoot GRE tunnel connectivity
  • Describe WAN topology options
    - Point-to-point
    - Hub and spoke
    - Full mesh
  • Describe WAN access connectivity options

    • - MPLS
    - VPN
  • NAT (Network Address Translation)

    • - Static
    - Pool
    - PAT

-

LAB: WAN Technologies

  • 1 Configure and verify PPP Authentication
  • 2. Configure and verify GRE Tunnel.
  • 3. Configure and verify Static NAT
  • 4. Configure and verify Dynamic NAT
  • 5. Configure and verify PAT

-

Troubleshooting: WAN Technologies

  • Troubleshoot and Resolve WAN implementation issues

    • - Serial interfaces
    - PPP
    - IP Pool

-

LAN Switching Technology

  • Broadcast Domain
  • Bridges and Hubs
  • Bridge & its Function

    • - Flooding
    - Forwarding
    - Filtering
  • Describe and verify switching concepts
  • MAC learning and aging
  • Frame switching
  • Frame flooding
  • MAC address table
  • Troubleshoot interface and cable issues (duplex, speed)
  • Configure, verify, and troubleshoot VLANs (normal/extended range) spanning multiple switches
  • VLAN & its Advantage
  • Network segmentation
  • Security
  • Enhanced performance
  • How to Create VLAN
  • Data Vlan
  • Types of VLAN membership
  • Access port & Access link
  • Default VLAN or Native Vlan
  • Configure, verify, and troubleshoot inters witch connectivity
  • Trunk port & Trunk link
  • How to form trunk & its requirements
  • Trunking Protocols ISL & dot1q
  • Add and remove VLANs on a trunk
  • 802.1x
  • Nondefault native VLAN
  • DHCP snooping

-

VTP & its need

  • VTP implementation requirement
  • VTP operational modes

    • - Server
    - Clients
    - Transpor

-

Configure, verify, and troubleshoot STP protocols

  • STP (Spanning Tree Protocol)
  • Convergence Components

    • - lowest Bridge ID
    - lowest RPC
    - lowest Sender BID
    - lowest Sender Port ID
  • STP Convergence Steps:

    • - Election of Root Bridge.
    - Election of Root Port.
    - Election of Designated Port
  • Drawback of STP

-

STP advance Feature

  • Uplinkfast
  • Portfast
  • Backbonefast

-

Configure, verify, and troubleshoot (Layer 2/Layer 3) EtherChannel

  • EtherChannel Protocl

    • - LACP
    - PAGP
  • LACP Operational Mode
  • PAGP Operational Mode
  • EtherChannel Load Balance

-

Infrastructure Security

  • Configure, verify, and troubleshoot port security

    • - Static
    - Dynamic
    - Sticky
    - Violation actions
    - Err-disable recovery

-

Recognize High availability (FHRP)

    - VRRP
    - HSRP
    - GLBP

-

LAB: SWITCH

  • 1. Configure and verify initial switch configuration
  • 2. Verify CAM Table.
  • 3. Configure and verify remote access management of switch
  • 4. Verify network status and switch operation using basic utilities such as ping,
  • 5. Telnet and SSH.
  • 6. Configure and verify Data
  • 7. Configure and verify Add and remove VLANs on a trunk
  • 8. Configure and verify VTP operational modes
  • 9. Configure and verify inter-vlan routing (Router on a stick)
  • 10. Configure SVI interfaces
  • 11. Configure and verify STP operation
  • 12.Configure and verify PVSTP operation
  • 13.Configure and verify portfast & BPDU guard operation
  • 14.Configure and verify Ether-Channel with LACP
  • 15.Configure and verify Ether-Channel with PAGP
  • 16.Configure and verify Port-Security Features
  • 17.Configure & Verify HSRP. (Priority & preempt)

-

Troubleshooting:

  • Troubleshoot and Resolve interVLAN routing problems

    • - Connectivity
    - Encapsulation
    - Subnet
    - Native VLAN
  • Port mode trunk status
  • Troubleshoot etherchannel problems
  • Troubleshoot and correct common problems associated with IP addressing and-host configurations.
  • Troubleshoot and Resolve VLAN problems

    • - Identify that VLANs are configured
    - port membership correct
    - IP address configured
  • Troubleshoot and Resolve trunking problems on Cisco switches

    • - Correct trunk states
    - Correct encapsulation configured
    - Correct vlans allowed
  • Troubleshoot and Resolve Spanning Tree operation issues

    • - Root switch
    - Priority
    - Mode is correct
    - Port states

-

IPv6

  • Introduction of IPv6
  • Need of IPv6

-

IPv6 addressing

  • Link Local address
  • Site local address
  • Global Unicast Address
  • Multicast Address
  • eui 64
  • autoconfiguration

-

IPv6 packet type

  • Unicast
  • Multicast
  • Anycast

-

IPv4 to IPv6 Migration

  • IPv4 to IPv6 Migration

    • - Dual stack
    - 6 to4 tunnelling
    - NATP (Network address translation protocol)
  • Different way to represent Ipv6
  • IPv6 supporting protocols
  • RIPng
  • OSPF v3
  • EIGRP v6

-

LAB: IPv6

  • 1. Configure, verify, and troubleshoot IPv6 Static Route
  • 2. Configure, verify, and troubleshoot IPv6 Default Route
  • 3. Configure, verify, and troubleshoot IPv6 Host Route
  • 5. Configure, verify, and troubleshoot EIGRP for IPv6
  • 6. Configure, verify, and troubleshoot single area and multi-area OSPFv3 for IPv6

-

OSI (Open System Interconnection) & TCP/IP

  • Intoduction to OSI or Layerd Structure model
  • Data encapsulation & De-encapsulation Process
  • PDU form of Data at each layer
  • Role of OSI Layer

    • - Application
    - Presentation
    - Session
    - Transport
    - Network
    - Data Link
    - Physical
  • Introduction of Protocols & Network Devices per layer
  • OSI peer to peer comminication diagram
  • OSI Vs TCP/IP
  • TCP/IP Layer

-

End of Course